噜妇插内射精品,最新国产精品自在自线发布,精品无码国产av一区二区,三上悠亚av作品在线观看

產品目錄

Products

產品中心

您現在的位置:首頁 > 產品中心 > 日本SMC > SMC氣缸 > 日本SMC鎖緊氣缸簡介,SMC鎖緊氣缸功能特性

日本SMC鎖緊氣缸簡介,SMC鎖緊氣缸功能特性

簡要描述:

日本SMC鎖緊氣缸簡介,SMC鎖緊氣缸功能特性
適合中間停止及急停?落下防止用的鎖緊氣缸。(雙向鎖緊)
氣源切斷時落下防止用的鎖緊氣缸內置,帶導桿的薄型氣缸。(單向鎖緊)
把制動機構緊湊內置在滑臺內。
能進行中間停止
 Construct so that the human body will not come into direct contact with driven objects or

更新時間:2024-10-25
訪問量:2199

日本SMC鎖緊氣缸簡介,SMC鎖緊氣缸功能特性


適合中間停止及急停?落下防止用的鎖緊氣缸。(雙向鎖緊)
氣源切斷時落下防止用的鎖緊氣缸內置,帶導桿的薄型氣缸。(單向鎖緊)
把制動機構緊湊內置在滑臺內。
能進行中間停止
 Construct so that the human body will not come into direct contact with driven objects or the moving parts of locking cylinders.   
If there is a risk of contact, provide safety measures such as a cover or a system that uses sensors that will activate an emergency stop before contact is made.
2. Use a balance circuit in which lurching of the piston is taken into consideration.
but only after a time lag. This lag determines the amount of the overrun of the piston stroke.
there are constraints in terms of the allowable kinetic energy that can be applied to the cylinder in a locked state.
Therefore, refer to the allowable kinetic energy of the respective series. Furthermore, during locking,
the mechanism must sustain the thrust of the cylinder itself, in addition to absorbing the kinetic energy.
 Therefore, even within a given allowable kinetic energy level, there is an upper limit to the amount of the load that can be sustained.
• Fine lock series (Series CLJ2/CLM2/ CLG1) Maximum load at horizontal mounting:
Thus, the range of the maximum and minimum amounts of the overrun is the stopping precision.
• Place the limit switch before the desired stopping position, only in the amount of the overrun.
• The limit switch must have a detection length (dog length) of the overrun amount + α.
• For SMC’s auto switches, the operating range are between 8 and 14 mm. (It varies depending on a switch model.)
When the overrun amount exceeds this range, self-holding of the contact should be performed at the switch load side.
∗  For stopping accuracy, refer to Series CLJ (P. 603), Series CLM2 (P. 614), Series CLG1 (P. 627), and Series CL1 (P. 637) respectively.
內置鎖機構的氣缸與導桿緊湊的體化,直線移動單元。(雙向鎖緊)
70% or less of the holding force (Maximum static load) for spring lock Maximum load at vertical mounting: 35% or less of the holding force
 (Maximum static load) for spring lock • Lock-up series (Series CL1) Maximum load at horizontal mounting: 50% or less of the holding force
(Maximum static load) Maximum load at vertical mounting: 25% or less of the holding force (Maximum static load) 3.In a locked state, do not apply impacts,
strong vibrations or rotational forces.   
Do not apply a impacts, strong vibrations or rotational forces from external sources,
because this could damage or shorten the life of the lock unit. 4.The locking of the fine lock cylinder is directional.    

日本SMC鎖緊氣缸簡介,SMC鎖緊氣缸功能特性
Although the fine lock cylinder can be locked in both directions, be aware that its holding force is smaller in one of the directions.   
帶磁性開關(CDLQ系列:CDLQ)
氣源切斷時落下防止用的鎖緊氣缸。
氣緩沖結構和鎖緊單元內置于薄型氣缸中。(單向鎖緊)
帶磁性開關(RDLQ系列:RDLQ)
If the lock is applied at a desired position of a stroke and compressed air is applied to only one side of the cylinder,
the piston will lurch at a high speed the moment the lock is disengaged. In such a situation, there is a risk of injury to humans,
or equipment damage. To prevent the piston from lurching, use a balance circuit such as the recommended pneumatic circuit (P. 598).
 If an air-hydro fine lock cylinder is used, make sure to operate the lock portion through air pressure.
 Never use oil on the lock-up cylinder because the lock-up cylinder is a non-lube style. Failure to observe this could cause the lock to malfunction.
Refer to the following criteria for the maximum load in the locked state, and set.
帶磁性開關(CDNG系列:CDNG)
適合中間停止及急停?落下防止用的鎖緊氣缸。(雙向鎖緊)
帶磁性開關(CDLS系列:CDLS)
氣源切斷時落下防止用的鎖緊氣缸。(單向鎖緊)
the maximum load must be set as described below. 1. For constant static loads, such as for drop prevention:
• Fine lock series (Series CLJ2/CLM2/ CLG1) 35% or less of the holding force (maximum static load) Note)
For applications such as drop prevention, consider situations in which the air source is shut off,
 and make selections based on the holding force of the spring locked state. Do not use the pneumatic lock for drop prevention purposes.
 • Lock-up series (Series CL1) 50% or less of the holding force (maximum static load)
2. When kinetic energy acts upon the cylinder, such as when effecting an intermediate stop,
適合中間停止、急停、落下防止用的鎖緊氣缸。(雙向鎖緊)
帶磁性開關(CDL□系列:CDLJ2、CDLM2、CDLG1、CDL1)
When a cylinder is in a no-load and locked state, the holding force (maximum static load) is the lock’s ability to hold a static load
that does not involve vibrations or shocks. To ensure braking force, 
CLJ2/CLM2/CLG1···· Holding force at piston rod extended side decreases approx. 15%. 5.The locking of the lock-up cylinder is unidirectional.  
 Because the locking direction of the lock-up cylinder is unidirectional, select the locking direction in accordance with the particular operating conditions. I
t is also possible to manufacture a bidirectional lock-up cylinder. For details, refer to “Made to Order” on page 1989. Due to the nature of its construction,
 a lock-up cylinder has a play of approximay 0.5 mm to 1 mm in the axial direction. Therefore,
if an external stopper is used to stop the piston rod and the lock is engaged, the piston rod will shift in the amount of its axial play.
6.To effect an intermediate stop, take the cylinder’s stopping precision and overrun amount into consideration.   
Because the lock is applied by mechanical means, the piston will not stop immediay in response to a stopping signal,

留言框

  • 產品:

  • 您的單位:

  • 您的姓名:

  • 聯系電話:

  • 常用郵箱:

  • 省份:

  • 詳細地址:

  • 補充說明:

  • 驗證碼:

    請輸入計算結果(填寫阿拉伯?dāng)?shù)字),如:三加四=7

CONTACT US
  • 成都市錦江區銀木街(綠地468)
  • 028-86751041
成都善榮機電設備有限公司 版權所有
點擊這里給我發消息 點擊這里給我發消息 點擊這里給我發消息 點擊這里給我發消息 點擊這里給我發消息 點擊這里給我發消息 點擊這里給我發消息
在線客服
一区二区三区在线 | 网站| 浪荡艳妇爆乳jufd汗だく肉感| 无码熟熟妇丰满人妻啪啪| 中文字幕二区AV人妻少妇| 99精品无人区乱码1区2区3区| 男人一边吃奶一边做爰免费视频| 极品少妇高潮啪啪av无码| 先锋影音人妻啪啪VA资源网站| 337p粉嫩日本亚洲大胆艺术| 久久久无码精品国产一区| 国产午夜精品一区二区三区| 色综合色狠狠天天综合色| 国产精品久久久久久福利| 成人年无码av片在线观看| 国产无遮挡吃胸膜奶免费看| 国产精品久久久久乳精品爆| 玩弄了裸睡少妇人妻野战| 国产未成女younv仙踪林| 精品国产乱码久久久久久口爆 | 亚洲精品国产一区二区精华液| 精品无码一区二区三区爱欲| 久久国产亚洲精品无码| 亚洲∧v久久久无码精品| 男男啪啪激烈高潮cc漫画免费| 色婷婷亚洲婷婷七月中文字幕| 五月天中文字幕mv在线| 亚洲欧美成人一区二区在线电影| 日本熟妇人妻中出| 亚洲第一aaaaa片| 久久久久亚洲av成人网人人网站| 免费观看成人欧美WWW色| 国产精品成人69xxx| 精品国内自产拍在线观看视频| 国产精品99久久精品爆乳 | 国产香蕉97碰碰久久人人| 东北粗口国产床| 国产啪亚洲国产精品无码| 驯服人妻hd中字日本| 国产女人18毛片水真多18精品| 久久国产精品偷任你爽任你a| 亚洲精品无码国产|